• Suitable For all size PVCU/CPVC/ABS pipe.
  • It can effectively remove the dire and oil stains on the bonding
  • surface of PVCU/CPVC/ABS pipes and valves.
  • It will works better when be used together with primer.

32Fl.OZ-1QUART - 946ML


Store between 40°F (5°C ) to 90°F( 33°C)


This product has no shelf life . use it as soon as possible after open to avoid evaporation waste due to seal reasons. please pay attention to the storage.


Please read the operation instructions carefully: 1.Hydro & Seal CL-20 cleaner is mainly used to clean and remove the oil and dirt from the bonding surfaces. 2. Using the CL-20 cleaner. primer and pipe cement combination giving the best bonding result. 3. Apply the cleaner before the use of primer and pipe cement.


This product is flammable. Vapor harmful. Swallow prohibited. if contact with skin and eyes may cause allergic reactions. Read left notes, product reports and material safety data sheets carefully before use. Use only in Well-ventilated Area.


Keep this product out of reach of children. do not take internally. Keep away from fire, open flame and any SOURCES of ignition, the volatile gas can cause explosions. Use with adequate ventilation; if not enough air circulation, ventilation facilities should be strengthened or the use of national occupational safety and health society approved breathing apparatus. Avoid breathing vapors. Use appropriate protective equipment to avoid contact with skin and eyes. May cause eye injury. In case of difficulty in breathing, give oxygen and should promptly seek medical treatment immediately. In case of contact with skin and eyes, flush with water for 15 minutes . if irritation persists , get medical attention . if accidentally swallowed, do not induce vomiting, immediately drink two cups of water. and contact physician immediately.

download MSDS CL-20 pdf